Related dynamometers images

table6 jpg

Configuration02 2 2 fot1jpg jpg

Chassis dynamometers for karts motorcycles motorbikes ATV car trucksengine 1 jpg

Engine Dynamometersengine 2 jpg

Engine Dynamometerstow 1 jpg

Tow Dynamometerstow 2 jpg

Tow Dynamometersself cooled powder dynamometers large jpg

Click here to zoom Click here to zoomcycle dyn pic2 jpg

cycle dyn pic1 jpg

cycle dyn pic4 jpg

* The power and torque measures

Each stand is designed to measure the following characteristics:

* Par
* Turnover
* The effects of internal combustion engine, electric motor or other sources of energy.

A host of companies provide various solutions to measure these characteristics, but society is that all the work dynamometer in the same way.

In addition are classified as absorption, or the implementation of universal, most dynamometers fall into two categories:

* Engine dynamometer is designed for direct connection to the drive motor during the test.
* Chassis dynamometers measure the effects of the train rolls in a car tire during the test.

In addition to the traditional dynamometer select companies’ portable dynamometer to go directly to the inertia of the engine. This allows the precise measurement of the engine without the engine in his car train.

With a simple display of power system with manual control with fully automated test solutions, this is a test system for electronic engine to meet the requirements of the test.

* Wiszące of Eddy currents: the use of magnetic flux between the permanent and electromagnets spun rotary engine during the test.
* Powder dynamometers: the creation of the thin magnetic powder between the rotor and coil plug.
* Electric motor test systems: electric motors Test System has been designed to ensure maximum reliability, durability and excellent performance available for testing electric motors from 5 to 4,250 horsepower.
* Fan, hydraulic brakes and water: the use of air, water or hydraulic fluid to indicate how much is used to the system

Dynamometer

The chassis dynamometer used to quickly identify problems such as low power consumption, heat, pollution and the accuracy rate. After the samples are identified and rectified, the problem has been resolved and may be used to provide the engine after the break reconstruction.

Accessories

* Exhaust system
* Railing Stone
* Guard wheels
* Friction fan
* Calibration weight

The engine dynamometer - a system of diagnosis

The dynamometer engine is the most innovative diagnostic engine today offers solutions to problems such as low power, lack of torque, and leaks. Dynamometer engine, also has the ability to identify and verify:

* Repair is complete
* Labor, depending on engine specifications
* Are you ready to break in the engines before installation

The engine dynamometer range of products includes: water brake dynamometer engine, in the style of portable dynamometer, in VORTEX dynamometer, and AC dynamometer.

Small passenger cars to trucks, electricity is sent through the trees to two transmissions from dial-neutral. Four electric brake flames are attached to the shaft in the case of transfers, which is controlled by the cabin instrumentation in a test environment. Flame retardant effect in terms of supply tension to the air traffic controllers are in the cabinet.

Water Supply

It can be used with any style or engine dynamometer. The system can handle multiple engine dynamometer system or roller, whose capacity is built into the system. Recirculating water specially designed for moderate to high volume users or engine test bench and requires less misce or ground tank.

Advantages of using a tube with a bench:

* Reduction in operating costs through load water
* Reducing the cost of living in the dynamometer with the quality, water supply
* Easy to clean material obtained by evaporation, in contrast to flow
* Remember to perform roller to maintain water pressure, quantity and cold